@


@ @
@
 
@
- 110 Cross-Connect System
-  LSA+ Connection System
-  ADSL Accessories
-  ISDN Accessories
@
@
@
@
  LSA+ CONNECTION SYSTEM

LSA+ CONNECTION STSTEM

LSA+ connection system can be used throughout the local loop, in main distribution frames, cross-connection cabinets, distribution points and in-house areas. The contact security is especially noteworthy without worrying about climatic and other environmental problems. Technical contact security results in the formation of a gas-tight connection with very low transmission resistance. Connection is made through the special termination tool, which means the quality of the connection is always repeatable.

@

PLUS TYPE

Connection modules have 1-piece type contact which providing a continuous link between jumper wiring and permanent wiring, giving provision for monitoring access and over voltage protection.

@
Ordering Information
  Part No. Description Dimension (mm)
  HM-KCMS08-ABS 8-pair.ABS.

L103.0 x W21.3 x H39.5

  HM-KCMS08-PBT 8-pair.PBT. L103.0 x W21.3 x H39.5
  HM-KCMS10-ABS 10-pair.ABS. L123.0 x W21.3 x H39.5
  HM-KCMS10-PBT 10-pair.PBT. L123.0x W21.3 x H39.5

PROFIL TYPE                                                                                             
Ordering Information
  Part No. Description Dimension (mm)
  HM-KCML10-PBT 10-pair.PBT. L122.0 x W22.6 x H40.6
  HM-KCML10E-PBT 10-pair W/Earth Clip, PBT. L122.0 x W22.6 x H40.6

PLUS TYPE

@

DISCONNECTION MODULES
Disconnection modules have 2-piece type contacts that closed normally. This gives all the features as connection modules plus the advantage of individual pair disconnection and 4-wire test access.
Ordering Information
  Part No. Description Dimension (mm)
  HM-KDMS08-ABS 8-pair.ABS. L103.0 x W21.3 x H39.5
  HM-KDMS08-PBT 8-pair.PBT. L103.0 x W21.3 x H39.5
  HM-KDMS10-ABS 10-pair.ABS. L123.2 x W21.3 x H39.5
  HM-KDMS10-PBT 10-pair.PBT. L123.2 x W21.3 x H39.5

PROFIL TYPE
Ordering Information
  Part No. Description Dimension (mm)
  HM-KDML10-PBT 10-pair, PBT. L122.0 x W22.6 x H40.6
  HM-KDML10E-PBT 10-pair W/Earth Clip, PBT. L122.0 x W22.6 x H40.6

DISTRIBUTION BOXes
Distribution boxes come with back mount frame normally.

          

MINI TYPE
Wall mount mini distribution boxes with up to 30-pair modules and cover.

MINI TYPE                                                                                                                                 Wall mount mini distribution boxes with up to 30-pair modules and cover.

Ordering Information
  Part No. Description Dimension (mm)
  HM-KDB-M10/DA 10-pair Distribution Box W/Disconnection Module, ABS. L165.0 x W85 x H35
  HM-KD8-M30 30-pair Distribution Box, ABS. L150.0 x W105 x H56

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


          

REGULAR TYPE
These boxes are designed for surface and flush mounting.
Ordering Information
  Part No. Description Dimension (mm)
  HM-KDB-RS030 Distribution Box, Screw Lock. L162 x W163 x H76
  HM-KDB-RS050 Distribution Box, Screw Lock. L190 x W250 x H140
  HM-KDB-RS100 Distribution Box, Screw Lock. L240 x W165 x H95
  HM-KDB-RK030 Distribution Box, Key Lock. L162 x W163 x H76
  HM-KDB-RK050 Distribution Box, Key Lock. L190 x W250 x H140
  HM-KDB-RK100 Distribution Box, Key Lock. L280 x W206 x H113
  HM-KDB-RC030 Distribution Box, Coin Lock. L171 x W140 x H75
  HM-KDB-RC050 Distribution Box, Coin Lock. L209 x W209 x H75
  HM-KDB-RC100 Distribution Box, Coin Lock. L320 x W215 x H75

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


OUTDOOR TYPE
The boxes made of highly impact resistant polypropylene (PP).
Ordering Information
  Part No.                Pair Description Dimension (mm)
  HM-KDB-OS008 8 Distribution Box, Screw Lock. L160 x W115 x H85
  HM-KDB-OS010 10 Distribution Box, Screw Lock. L160 x W115 x H85
  HM-KDB-OS030 30 Distribution Box, Screw Lock. L185 x W135 x H80
  HM-KDB-OS050 50 Distribution Box, Screw Lock. L195 x W195 x H85
  HM-KDB-OS100 100 Distribution Box, Screw Lock. L350 x W190 x H95

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


MOUNTING FRAMES
The mounting frame is made by stainless steel.

FOR 8-PAIR MODULES
Ordering Information
  Part No. Description Dimension (mm)
  HM-KMF808 8-Pair. L22.5 x W85 x H52
  HM-KMF816 16-Pair. L45 x W85 x H52
  HM-KMF824 24-Pair. L67.5 x W85 x H52
  HM-KMF840 40-Pair. L112.5 x W85 x H52
  HM-KMF880 80-Pair. L225 x W85 x H52
  HM-KMF088 88-Pair. L247.5 x W85 x H52

FOR 10-PAIR MODULES                                                                                               

Ordering Information
  Part No. Description Dimension (mm)
  HM-KMF010 10-Pair. L22.5 x W105 x H50
  HM-KMF020 20-Pair. L45 x W105 x H50
  HM-KMF030 30-Pair. L67.5 x W105 x H50
  HM-KMF050 50-Pair. L112.5 x W105 x H50
  HM-KMF060 60-Pair. L135 x W105 x H50
  HM-KMF080 80-Pair. L180 x W105 x H50
  HM-KMF100 100-Pair. L225 x W105 x H50
  HM-KMF110 110-Pair. L225 x W105 x H50
  HM-KMF160 160-Pair. L360 x W105 x H70
  HM-KMF210 210-Pair. L472.5 x W105 x H70
  HM-KMF310 310-Pair. L697.5 x W105 x H70

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


JUMPERABLE FRAMES
Jumperable frames for mounting of 10-pair modules internal use as a campus distributor, building distributor, or floor distributor at the network boundary.

BACK MOUNT TYPE
Ordering Information
  Part No. Description
  HM-KJF100 100-Pair.
  HM-KJF110 110-Pair.
  HM-KJF160 160-Pair.
  HM-KJF210 210-Pair.
  HM-KJF310 310-Pair.

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


ROD MOUNT TYPE
Ordering Information
  Part No. Description
  HM-KJB100 100-Pair.
  HM-KJB250 250-Pair.

*Note: Boxes are sold empty. PLUS type modules must be ordered separated.


SURGE ARRESTORS
Used for overvoltage protection magazine.
Ordering Information
  Part No. Description
  HM-KGA3-230 3-pole 230V.
  HM-KGA3-230F 3-pole 230V W/Fail Safe.
  HM-KGA3-350 3-pole 350V.
  HM-KGA3-350F 3-pole 350V W/Fail Safe.

ARRESTOR MAGAZINES
The arrestor magazines hold up to ten 3-pole arrestors for surge protection of modules mounted on a back mount frame.
Ordering Information
  Part No. Description
  HM-KPM10 10-pair, Unloaded.
  HM-KPM10/A3-230 10-pair, Loaded W/3-pole 230V.
  HM-KPM10/A3-230F 10-pair, Loaded W/Fail Safe 3-pole 230V.
  HM-KPM10/A3-350 10-pair, Loaded W/3-pole 350V.
  HM-KPM10/A3-350F 10-pair, Loaded W/Fail Safe 3-pole 350V.

PROTECTION PLUG
Used with earth bar for overvoltage protection.
Ordering Information
  Part No. Description
  HM-KLP-01 Compact 1-Pair 5-Point Overvoltage Lighting Protector.

Ordering Information
  Part No. Description
  HM-KLP02 1-Pair 5-Point Overvoltage Lighting Protector.

EARTH BAR
Earth connection for 1-pair protection plugs between the distribution frame and the protection plugs.
Ordering Information
  Part No. Description
  HM-KEB10A 10-pair.

DISCONNECTION PLUG
Plug for disconnecting a circuit.
Ordering Information
  Part No. Description
  HM-KDP01 Disconnection Plug.

TERMINATION TOOL
The termination tool installs LSA+ module in your networking systems. The tool design includes termination, stripping & cutting.
Ordering Information
  Part No. Description
  HM-KTL002 Insertion Tool for LSA+ Module Terminates & cuts.

VOICE PATCH PANELS
FEATURES
- High density Cat.3 voice patch panel.                                                                                                                               - 19" panel w/cable tie cutout to manage each different cable.                                                                                        - Available for 25 & 50-port RJ45 in 1U, cost effective.                                                                                                      - 110 or LSA+ compatible ID.

Ordering Information
  Part No. Description Height
  HM-BP25-8-C3 25-Port Cat.3 Unshielded Patch Panel, 5-in-1, 110 IDC. 1U
  HM-BP50-8-C3 50-Port Cat.3 Unshielded Patch Panel, 10-in-1, 110 IDC. 1U
  HM-BP25-K8-C3 25-Port Cat.3 Unshielded Patch Panel, 5-in-1, LSA+ IDC. 1U
  HM-BP50-K8-C3 50-Port Cat.3 Unshielded Patch Panel, 10-in-1, LSA+ IDC. 1U
  HM-BP25-B8-C3 25-Port Cat.3 Unshielded Patch Panel, 5-in-1, KATT IDC. 1U
  HM-BP50-B8-C3 50-Port Cat.3 Unshielded Patch Panel, 10-in-1, KATT IDC. 1U

PATCH CORDS
Patch cord fitted with LSA plug and 6P U.S. modular plug. Idea for connects telephone patch panels.
Ordering Information
  Part No. Description
  HM-KTC1TP-01 2-Pole LSA+ Plug To RJ11 (6P2C) Plug Cord, L=1m.
  HM-KTC2TP-01 4-Pole LSA+ Plug To RJ14 (6P4C) Plug Cord, L=1m.

TEST CORDS
Test cord fitted with test plug and 6P U.S. modular plug or alligator clip. Idea for connects the test equipment to MDF or IDF.
Ordering Information
  Part No. Description
  HM-KTC1TA-01 2-Pole LSA+ Plug To Alligator Clip Cord, L=1m.
  HM-KTC2TA-01 4-Pole LSA+ Plug To Alligator Clip Cord, L=1m.

<back>
Copyright © 2010 Web Design, HOMER EUROPE, LTD.